1. Product Overview: AMS236/AMS336 - Precision Voltage References

️· Function: These are precision voltage references. They provide a stable and accurate voltage output.
️· Typical Output: 2.5V
️· Manufacturer: Advanced Monolithic Systems, Inc.
️· Contact Information: 6680B Sierra Lane, Dublin, CA 94568; Phone (925) 556-9090; Fax (925) 556-9140

2. Key Features

️· Precision: Provides a highly accurate voltage reference.
️· Low Temperature Coefficient: Designed for minimal voltage drift with temperature changes.
️· Versatile Applications: Suitable for various applications (see "Application Circuits" below).
️· Stable Output: Maintains a consistent output voltage.

3. Electrical Characteristics

️· Output Voltage: 2.5V (typical)
️· Temperature Stability: Guaranteed by design limits (not 100% production tested). The average temperature coefficient is defined by the maximum voltage deviation across the specified temperature range, divided by the temperature range itself.
️· Electrical Characteristics are presented in tables and charts within the full datasheet (not fully listed here due to length).
- Includes Reverse Characteristics information
- Includes Typical Performance Characteristics graphs: Reverse Voltage Change vs Current and Response Time.

4. Application Circuits (Example Uses)

️· 2.5V Reference: Basic use of the reference as a stable voltage source.
️· Wide Input Range Reference: Used in circuits with varying input voltage levels.
️· 2.5V Reference with Minimum Temperature Coefficient: Optimized for applications where temperature stability is paramount.
️· Precision Power Regulator with Low Temperature Coefficient: Used to create stable power supplies.
️· Trimmed 2.5V Reference with Temperature Coefficient Independent of Breakdown Voltage: Used when fine-tuning the reference voltage is needed, and avoiding influence from the breakdown voltage is important.

5. Package Information

️· TO-92 Plastic Package (N): Dimensions are specified in inches (millimeters).
️· SO-8 Plastic Package (S): Dimensions are also specified in inches (millimeters).
️· Flash Limits: The dimensions do *not* include mold flash. Mold flash should not exceed 0.006" (0.152mm) per side. Interlead flash should not exceed 0.010" (0.254mm) per side.

6. Important Notes

️· Datasheet Abbreviation: This document is an excerpt. Refer to the full datasheet for complete specifications, electrical characteristics tables, and more detailed information.
️· Temperature Stability: Temperature stability is guaranteed by design limits, not by 100% production testing.
️· Typical Performance Characteristics: The provided graphs show how the voltage characteristics change with reverse voltage and time.