PM7367 datasheet(297/323 Pages) PMC

Il numero della parte	PM7367

Spiegazioni elettronici	FRAME ENGINE AND DATA LINK MANAGER

PDF	323 Pages

Scroll/Zoom	100%

Produttore elettronici	PMC [PMC-Sierra, Inc]

Homepage	http://www.pmc-sierra.com

Logo

297 / 323 page

PM7367 FREEDM-32P32

DATA SHEET

PMC-1991499

ISSUE 2

FRAME ENGINE AND DATA LINK MANAGER

PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMER’S INTERNAL USE

283

STCTEST

The single transport chain instruction is used to test out the TAP controller and

the boundary scan register during production test. When this instruction is the

current instruction, the boundary scan register is connected between TDI and

TDO. During the Capture-DR state, the device identification code is loaded into

the boundary scan register. The code can then be shifted out output, TDO using

the Shift-DR state.

INTEST

The internal test instruction is used to exercise the device's internal core logic.

When this instruction is the current instruction, the boundary scan register is

connected between TDI and TDO. During the Update-DR state, patterns shifted

in on input, TDI are used to drive primary inputs. During the Capture-DR state,

primary outputs are sampled and loaded into the boundary scan register.

PM7367 Scheda tecnica(PDF) 297 Page - PMC-Sierra, Inc