4513 datasheet(192/210 Pages) RENESAS

192 / 210 page

4513/4514 Group User’s Manual

APPENDIX

3-25

3.4 Notes on noise

(3)

Wiring for clock input/output pins

• Make the length of wiring which is connected

to clock I/O pins as short as possible.

• Make the length of wiring across the

grounding lead of a capacitor which is

connected to an oscillator and the VSS pin

of a microcomputer as short as possible.

• Separate the VSS pattern only for oscillation

from other VSS patterns.

Fig. 3.4.3 Wiring for clock I/O pins

q Reason

If noise enters clock I/O pins, clock

waveforms may be deformed. This may

cause a program failure or program runaway.

Also, if a potential difference is caused by

the noise between the VSS level of a

microcomputer and the VSS level of an

oscillator, the correct clock will not be input

in the microcomputer.

Fig. 3.4.4 Wiring for CNVSS pin

Noise

XIN

XOUT

VSS

XIN

XOUT

VSS

N.G.

O.K.

Noise

CNVSS

VSS

CNVSS

VSS

N.G.

O.K.

(4)

Wiring to CNVSS pin

Connect the CNVSS pin to the VSS pin with

the shortest possible wiring.

q Reason

The operation mode of a microcomputer is

influenced by a potential at the CNVSS pin.

If a potential difference is caused by the

noise between pins CNVSS and VSS, the

operation mode may become unstable. This

may cause a microcomputer malfunction or

a program runaway.

4513 Scheda tecnica(PDF) 192 Page - Renesas Technology Corp

4513 Scheda tecnica(HTML) 192 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL