68HC705SP7 datasheet(145/230 Pages) FREESCALE

Il numero della parte	68HC705SP7

Spiegazioni elettronici	General Release Specification

PDF	230 Pages

Scroll/Zoom	100%

Produttore elettronici	FREESCALE [Freescale Semiconductor, Inc]

Homepage	http://www.freescale.com

Logo

145 / 230 page

Simple Serial Interface

SIOP Registers

MC68HC705JJ7/MC68HC705JP7 — Rev. 3.0

General Release Specification

Simple Serial Interface

9.4.3 SIOP Data Register (SDR)

The SIOP data register (SDR) is located at address $000C and serves

as both the transmit and receive data register. Writing to this register will

initiate a message transmission if the node is in master mode. The SIOP

subsystem is not double buffered and any write to this register will

destroy the previous contents. The SDR can be read at any time.

However, if a transfer is in progress the results may be ambiguous.

Writing to the SDR while a transfer is in progress can cause invalid data

to be transmitted and/or received. Figure 9-6 shows the position of each

bit in the register. This register is not affected by reset.

$000C

Bit 7

654321

Bit 0

Read:

Bit 7

654321

Bit 0

Write:

Reset:

Unaffected by Reset

Figure 9-6. SIOP Data Register (SDR)

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

68HC705SP7 Scheda tecnica(PDF) 145 Page - Freescale Semiconductor, Inc