PIC16F1946 datasheet(124/478 Pages) MICROCHIP

124 / 478 page

PIC16(L)F1946/47

DS41414D-page 124

 2010-2012 Microchip Technology Inc.

EECON1: EEPROM CONTROL 1 REGISTER

R/W-0/0

R/W/HC-0/0

R/W-x/q

R/W-0/0

R/S/HC-0/0

EEPGD

CFGS

LWLO

FREE

WRERR

WREN

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

S = Bit can only be set

x = Bit is unknown

-n/n = Value at POR and BOR/Value at all other Resets

‘1’ = Bit is set

‘0’ = Bit is cleared

HC = Bit is cleared by hardware

bit 7

EEPGD: Flash Program/Data EEPROM Memory Select bit

1 = Accesses program space Flash memory

0 = Accesses data EEPROM memory

bit 6

CFGS: Flash Program/Data EEPROM or Configuration Select bit

1 = Accesses Configuration, User ID and Device ID Registers

0 = Accesses Flash Program or data EEPROM Memory

bit 5

LWLO: Load Write Latches Only bit

If CFGS = 1 (Configuration space) OR CFGS = 0 and EEPGD = 1 (program Flash):

1 = The next WR command does not initiate a write; only the program memory latches are

updated.

0 = The next WR command writes a value from EEDATH:EEDATL into program memory latches

and initiates a write of all the data stored in the program memory latches.

If CFGS = 0 and EEPGD = 0: (Accessing data EEPROM)

LWLO is ignored. The next WR command initiates a write to the data EEPROM.

bit 4

FREE: Program Flash Erase Enable bit

If CFGS = 1 (Configuration space) OR CFGS = 0 and EEPGD = 1 (program Flash):

1 = Performs an erase operation on the next WR command (cleared by hardware after

completion of erase).

0 = Performs a write operation on the next WR command.

If EEPGD = 0 and CFGS = 0: (Accessing data EEPROM)

FREE is ignored. The next WR command will initiate both a erase cycle and a write cycle.

bit 3

WRERR: EEPROM Error Flag bit

1 = Condition indicates an improper program or erase sequence attempt or termination (bit is set

automatically on any set attempt (write ‘1’) of the WR bit).

0 = The program or erase operation completed normally.

bit 2

WREN: Program/Erase Enable bit

1 = Allows program/erase cycles

0 = Inhibits programming/erasing of program Flash and data EEPROM

bit 1

WR: Write Control bit

1 = Initiates a program Flash or data EEPROM program/erase operation.

The operation is self-timed and the bit is cleared by hardware once operation is complete.

The WR bit can only be set (not cleared) in software.

0 = Program/erase operation to the Flash or data EEPROM is complete and inactive.

bit 0

RD: Read Control bit

1 = Initiates an program Flash or data EEPROM read. Read takes one cycle. RD is cleared in

hardware. The RD bit can only be set (not cleared) in software.

0 = Does not initiate a program Flash or data EEPROM data read.

PIC16F1946 Scheda tecnica(PDF) 124 Page - Microchip Technology

PIC16F1946 Scheda tecnica(HTML) 124 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL