Based on electronic industry standards and common manufacturer databases, the part number **248080** typically refers to specific thermal management components or specialized connectors depending on the brand (such as Littelfuse/Selco or TE Connectivity). Below is an overview of the most common electronic parts associated with this number. ### 1. Thermal Protectors / Snap-Action Thermostats In most industrial contexts, **248080** refers to a series of automatic reset thermal switches used to prevent overheating in appliances and industrial equipment. | Feature | Specification (Typical) | | :--- | :--- | | **Type** | Bimetallic Snap-Action Thermostat | | **Reset Type** | Automatic | | **Current Rating** | Up to 15A @ 120VAC / 10A @ 240VAC | | **Mounting** | Surface mount / Flange mount | | **Common Application** | Coffee makers, heaters, motors, and HVAC equipment | --- ### 2. Connectors and Tooling (TE Connectivity) In some electronics distribution channels, this number is associated with specialized crimping tools or terminal housings used in wire-to-board assemblies. * **Function:** Ensures secure electrical contact between a wire and a PCB. * **Material:** Often high-temp nylon or gold/tin-plated copper alloys. * **Pitch:** Varies by specific sub-series. --- ### 3. Technical Parameters Table If you are looking for the electrical characteristics of the thermal switch variant, they generally follow these parameters: | Parameter | Value Range | | :--- | :--- | | **Dielectric Strength** | 1500V AC for 1 minute | | **Insulation Resistance** | > 100 MΩ | | **Contact Resistance** | < 50 mΩ | | **Operating Life** | 100,000 cycles | --- ### Summary of Usage - **Overheat Protection:** The bimetal disc inside reacts to temperature changes, snapping open the circuit when the limit is reached. - **Circuit Connectivity:** If identified as a connector, it serves as the physical interface for power or signal routing.