30LVS10-R
AI

The **30LVS10-R** is a specific type of **Ceramic Disc Capacitor**, typically categorized as a Safety-Rated (Y-Class) capacitor. These components are primarily used in AC line filtering applications to provide EMI/RFI suppression and to ensure electrical safety.
---
## 1. Technical Specifications
Below are the primary technical parameters for the 30LVS10-R:
| Parameter | Specification |
| :--- | :--- |
| **Component Type** | Ceramic Disc Capacitor |
| **Capacitance Value** | 0.01 µF (10,000 pF) |
| **Voltage Rating** | 300V AC (Standard Safety Rating) |
| **Safety Classification** | X1 / Y2 |
| **Tolerance** | ±20% (Standard for this series) |
| **Mounting Type** | Through-Hole (Radial Leads) |
| **Operating Temperature** | -30°C to +125°C |
---
## 2. Key Features
The "LVS" series is designed for durability and compliance with international safety standards:
* **Self-Healing Properties:** Designed to handle transient voltage spikes without resulting in a permanent short circuit.
* **Flame Retardant:** The outer coating is usually made of epoxy resin that meets UL 94V-0 standards for fire safety.
* **High Reliability:** Built to withstand humid environments and high-voltage stress over long periods.
---
## 3. Application Areas
These capacitors are found in power supply circuits where they act as a bridge between high-voltage lines and the ground.
### Primary Uses:
1. **Line-to-Ground (Y-Capacitor):** Used to filter out common-mode noise. If the capacitor fails, it is designed to fail "open" to prevent the chassis of a device from becoming live.
2. **EMI/RFI Suppression:** Reduces electromagnetic interference in switching power supplies (SMPS).
3. **Antenna Coupling:** Used in radio and television circuits to isolate the antenna from the main power line.
---
## 4. Part Number Breakdown (Typical)
While naming conventions vary slightly by manufacturer (such as Vishay or Cera-Mite), the code usually breaks down as follows:
* **30:** Often refers to the voltage class or series series (e.g., 300V AC).
* **LVS:** The specific product line (Low-Voltage Safety).
* **10:** Represents the capacitance (often the first two digits of the value).
* **-R:** Indicates compliance with **RoHS** (Restriction of Hazardous Substances) standards.
---
- ⤷
What is the difference between an X1 and a Y2 safety rating for this capacitor?
- ⤷ Can a 30LVS10-R be substituted with a film capacitor of the same value?
- ⤷ What are the common failure modes for ceramic safety capacitors?