AI

The **47DAC-211-R** is a specific electronic component, typically categorized as a **Rotary Encoder** or a **BCD (Binary Coded Decimal) Rotary Switch**, often manufactured by companies like **Grayhill** or similar precision switch producers.
Below is a detailed breakdown of its specifications, functionality, and internal parts.
---
## 1. Technical Specifications
The part number follows a specific nomenclature. Here is the general profile for this series:
| Parameter | Specification |
| :--- | :--- |
| **Component Type** | Rotary Coded Switch / Encoder |
| **Output Code** | Binary Coded Decimal (BCD) |
| **Positions** | 10 or 16 Positions (Standard for 47D series) |
| **Mounting Type** | Through-Hole (PCB) |
| **Actuator Style** | Recessed / Flush Screwdriver Slot |
| **Contact Rating** | Usually 100mA at 50V DC |
| **Operating Temperature** | -40°C to +85°C |
---
## 2. Internal Electronic Parts and Construction
The 47DAC-211-R consists of several mechanical and conductive elements that work together to provide digital output:
### A. The Rotor (Actuator)
The visible part (usually white or black) that the user turns. It features a slot for a screwdriver. Internally, the rotor has a specific pattern of conductive material (often gold-plated) that bridges the contacts.
### B. The Stator (Contact Base)
A fixed ceramic or high-temperature plastic base containing the output pins. It has "tracks" that correspond to bits (1, 2, 4, 8) and a Common (C) pin.
### C. Contact System
* **Wiping Contacts:** These are small metal "fingers" that slide across the stator.
* **Gold Plating:** To ensure low contact resistance and prevent oxidation over long periods, the contacts are usually plated with gold over nickel.
---
## 3. Truth Table (BCD Logic)
As you rotate the switch, the internal parts connect the **Common** pin to specific output pins. For a BCD output (10-position), the logic follows this pattern:
| Position | Pin 1 (1) | Pin 2 (2) | Pin 3 (4) | Pin 4 (8) |
| :--- | :--- | :--- | :--- | :--- |
| **0** | Open | Open | Open | Open |
| **1** | **Closed** | Open | Open | Open |
| **2** | Open | **Closed** | Open | Open |
| **3** | **Closed** | **Closed** | Open | Open |
| **...** | ... | ... | ... | ... |
| **9** | **Closed** | Open | Open | **Closed** |
---
## 4. Typical Applications
These parts are used in "set and forget" configurations where a digital value needs to be assigned to a device without a screen or complex interface:
* **Address Setting:** Setting the ID for a node on a CAN bus or RS-485 network.
* **Mode Selection:** Choosing between different pre-programmed hardware modes.
* **Industrial Controls:** Timers, counters, and PLC input modules.
---
- ⤷
What is the difference between BCD and Gray Code in rotary switches?
- ⤷ How do you debounce the output of a 47DAC-211-R in a digital circuit?
- ⤷ Can this switch be used for AC voltage applications?