AFB0824SH-R00
AI

## Technical Overview of AFB0824SH-R00
The **AFB0824SH-R00** is a high-performance DC axial fan manufactured by **Delta Electronics**. It is part of the AFB series, known for its reliability and use of ball bearings to ensure longevity.
---
### Core Technical Specifications
| Parameter | Specification |
| :--- | :--- |
| **Frame Size** | 80mm x 80mm x 25.4mm |
| **Rated Voltage** | 24 VDC |
| **Operating Voltage Range** | 14.0 to 27.6 VDC |
| **Rated Current** | 0.22 A (Max 0.33 A) |
| **Input Power** | 5.28 W |
| **Speed** | 4000 RPM |
| **Max Air Flow** | 46.62 CFM (1.320 m³/min) |
| **Max Air Pressure** | 6.78 mmH₂O (0.267 inH₂O) |
| **Noise Level** | 40.0 dB-A |
| **Bearing Type** | Dual Ball Bearing |
---
### Electronic Components & Wiring
The "R00" suffix in the model number designates a specific electronic output feature: the **Locked Rotor Sensor (Sensor Signal)**.
#### 1. Internal Motor Circuitry
* **Brushless DC (BLDC) Motor:** The fan uses a 3-phase or single-phase permanent magnet motor driven by an internal electronic commutation circuit.
* **Auto-Restart:** The internal IC includes a feature that protects the motor if the blades are obstructed. It will attempt to restart periodically once the obstruction is removed.
* **Polarity Protection:** Usually includes an internal diode to prevent damage if the positive and negative leads are reversed.
#### 2. Wire Configuration (3-Wire Interface)
The unit typically features three color-coded wires:
1. **Red (+):** Positive power supply (24V).
2. **Black (-):** Ground (0V).
3. **White (R00):** This is the **Lock Sensor Signal**.
#### 3. The "R00" Signal Function (Alarm)
Unlike a Tachometer (FG) signal that pulses with speed, the **R00 signal** acts as a logic switch:
* **Normal Operation:** The signal stays at a "Low" voltage level while the fan is spinning.
* **Fan Failure (Locked Rotor):** If the fan stops rotating, the internal transistor turns off, and the signal goes "High" (pulled up to the supply voltage).
* **Purpose:** This allows a system controller to trigger an immediate alarm if the cooling fan fails.
---
### Materials and Durability
* **Impeller & Frame:** Plastic (UL 94V-0), which is flame retardant.
* **Life Expectancy:** Approximately 70,000 hours at 40°C, thanks to the high-quality dual ball bearing system.
- ⤷
How does the R00 lock sensor differ from an FG tachometer signal?
- ⤷ What are the recommended pull-up resistor values for the signal wire?
- ⤷ Can this fan be controlled using PWM for speed adjustment?