ATS-05G-210-C2-R0
AI

The **ATS-05G-210-C2-R0** is a high-performance heat sink component manufactured by **Advanced Thermal Solutions (ATS)**. It is part of the "push pin" series designed for cooling electronic components such as CPUs, GPUs, and other integrated circuits.
### 1. Technical Specifications
The following table summarizes the primary physical and thermal characteristics of this part:
| Feature | Specification |
| :--- | :--- |
| **Material** | Aluminum (Al) |
| **Finish** | Blue Anodized |
| **Dimensions (L x W x H)** | 70mm x 70mm x 12.7mm |
| **Thermal Resistance** | 5.18°C/W (at 200 LFM) |
| **Flow Orientation** | Top-to-Bottom (Straight Fin) |
| **Attachment Method** | Push-Pin (Brass) |
| **Interface Material** | T766 (Thermal Tape/Grease) |
---
### 2. Electronic Application & Function
In an electronic system, this component serves as a **passive heat exchanger**. Its primary roles include:
* **Heat Dissipation:** It increases the surface area of the heat-generating component, allowing air to carry thermal energy away more efficiently.
* **Thermal Protection:** By maintaining a lower operating temperature, it prevents "thermal throttling" and extends the lifespan of semiconductor devices.
* **Acoustic Management:** High-efficiency heat sinks like this one allow system fans to run at lower RPMs, reducing overall noise levels.
---
### 3. Key Design Features
1. **Straight Fin Design:** Optimized for environments with forced air (fans). The straight fins provide low pressure drop while maximizing airflow contact.
2. **Push-Pin Mounting:** Unlike adhesive-based heat sinks, the push-pin mechanism provides high pressure for better thermal contact and is more reliable under high-vibration or high-temperature conditions.
3. **Anodized Coating:** The blue anodized finish is not just for aesthetics; it provides electrical insulation and improves corrosion resistance.
---
### 4. Comparison with Similar Models
| Model Number | Height | Thermal Resistance (200 LFM) |
| :--- | :--- | :--- |
| **ATS-05G-210-C2-R0** | **12.7mm** | **5.18°C/W** |
| ATS-05G-209-C2-R0 | 10.0mm | 6.27°C/W |
| ATS-05G-211-C2-R0 | 15.00mm | 4.30°C/W |
- ⤷
How do I calculate the required airflow (LFM) for this heat sink?
- ⤷ What are the advantages of push-pins over thermal adhesive?
- ⤷ Does the blue anodized finish affect the thermal conductivity compared to bare aluminum?