The **ATS-12G-63-C2-R0** is a high-performance electronic thermal management component, specifically an **Advanced Thermal Solutions (ATS) push-pin heat sink**. It is designed for cooling high-heat-generating integrated circuits (ICs) such as CPUs, GPUs, or FPGAs. --- ### 1. Technical Specifications Below are the primary electronic and physical parameters for this specific part number: | Parameter | Specification | | :--- | :--- | | **Manufacturer** | Advanced Thermal Solutions (ATS) | | **Series** | pushPIN™ | | **Material** | Aluminum (AL6063) | | **Finish** | Blue Anodized | | **Attachment Method** | Push-Pin (Plastic/Brass) | | **Spring Type** | Compression Spring | | **Thermal Interface (TIM)** | T766 (Pre-applied phase change material) | | **Dimensions** | 45mm x 45mm x 20mm | --- ### 2. Physical Design Elements The part is engineered to maximize surface area while maintaining a low profile for modern electronic enclosures. * **Fin Style:** It utilizes a **Fine Pitch** fin design. This increases the density of the aluminum surface, allowing for better heat dissipation in systems with high airflow. * **Attachment Mechanism:** The `R0` designation refers to the push-pin mounting system. This provides a specific, consistent pressure (preload) against the electronic chip, which is critical for the effectiveness of the thermal interface material. * **Thermal Resistance:** This heat sink is rated for low thermal resistance (measured in °C/W), which varies based on the velocity of the air moving through the fins (measured in LFM - Linear Feet per Minute). --- ### 3. Electronic Application & Compatibility The ATS-12G-63-C2-R0 is commonly found in the following electronic environments: * **Networking Hardware:** Switches, routers, and high-speed hubs. * **Embedded Systems:** Industrial PCs and automation controllers. * **Power Electronics:** Cooling for VRMs (Voltage Regulator Modules) or power converters. #### Why the Material Choice Matters: The use of **AL6063 Aluminum** provides a balance between high thermal conductivity and structural rigidity. The **Blue Anodized** finish is not just aesthetic; it increases the emissivity of the surface, slightly improving radiant heat transfer and providing a protective layer against environmental corrosion. --- ### 4. Part Number Breakdown (Nomenclature) * **ATS:** Manufacturer (Advanced Thermal Solutions) * **12:** Series identifier * **G:** Fin type/Configuration * **63:** Size/Dimension code * **C2:** Material/Color (Blue Anodized) * **R0:** Revision/Packaging code