The **ATS-16D-134-C2-R0** is a high-performance electronic thermal management component, specifically a **Heat Sink** manufactured by Advanced Thermal Solutions (ATS). It is designed to dissipate heat from electronic components like CPUs, GPUs, or power transistors to prevent thermal throttling or hardware failure. --- ## Technical Specifications | Feature | Specification | | :--- | :--- | | **Manufacturer** | Advanced Thermal Solutions (ATS) | | **Series** | pushPIN™ | | **Material** | Aluminum | | **Fin Type** | Cross-Cut (Blue Anodized) | | **Attachment Method** | Push-Pin (Plastic) | | **Thermal Resistance (LFM)** | 4.44 °C/W @ 100 LFM | | **Dimensions (L x W x H)** | 70.00mm x 70.00mm x 15.00mm | | **Thermal Interface Material** | T766 (Pre-applied) | --- ## Key Components and Features ### 1. Cross-Cut Fin Design The "D" in the part number signifies a specific fin pattern. Cross-cut fins allow for multi-directional airflow, making it efficient in systems where the direction of the cooling air might change or is turbulent. ### 2. pushPIN™ Attachment Mechanism Unlike adhesive-based heat sinks, this uses a spring-loaded push-pin system. * **Security:** Provides consistent pressure on the component for optimal heat transfer. * **Ease of Use:** Allows for quick installation and removal without messy glues. ### 3. Thermal Interface Material (TIM) The part comes with **T766** pre-applied to the base. This is a high-performance phase-change material that fills microscopic gaps between the heat sink and the chip, significantly reducing thermal resistance. ### 4. Material and Finish * **Aluminum:** Chosen for its excellent weight-to-thermal conductivity ratio. * **Blue Anodized Finish:** Provides a protective layer against corrosion and slightly increases emissivity. --- ## Thermal Performance Data Performance varies based on the Airflow (Linear Feet per Minute - LFM): | Airflow Velocity (LFM) | Thermal Resistance (°C/W) | | :--- | :--- | | 100 | 4.44 | | 200 | 2.06 | | 300 | 1.62 | | 400 | 1.39 | ---