The **ATS-17G-06-C2-R0** is a specific electronic component categorized as a **High-Performance Heat Sink**, manufactured by Advanced Thermal Solutions (ATS). It is designed to dissipate heat from electronic components like CPUs, GPUs, or FPGAs. ### 1. Technical Specifications The following table outlines the physical and thermal characteristics of this part: | Feature | Specification | | :--- | :--- | | **Manufacturer** | Advanced Thermal Solutions Inc. (ATS) | | **Part Number** | ATS-17G-06-C2-R0 | | **Heat Sink Type** | Push-Pin (Push-Pin Attachment) | | **Material** | Aluminum | | **Finish** | Blue Anodized | | **Dimensions (L x W x H)** | 40mm x 40mm x 25mm | | **Thermal Resistance** | ~2.01°C/W (at 200 LFM) | | **Flow Type** | Cross-Cut (Omnidirectional) | --- ### 2. Key Design Elements * **Cross-Cut Fin Pattern:** The "fins" are cut in both directions. This design is highly effective in systems where the direction of airflow is inconsistent or unpredictable, as it allows air to enter from any angle. * **Push-Pin Attachment:** The `-R0` suffix indicates a specific mounting style. It uses pre-assembled plastic push-pins and springs to provide a secure, high-pressure attachment to the PCB, ensuring optimal contact between the heat sink and the chip. * **Blue Anodized Coating:** The blue finish isn't just aesthetic; it provides increased surface emissivity and corrosion resistance, slightly improving thermal radiation performance. * **Thermal Interface Material (TIM):** Typically, these units come with a pre-applied Phase Change Material (PCM) or thermal tape (like ATS's *Saint-Gobain* or *3M* series) to fill microscopic air gaps between the component and the sink. --- ### 3. Application Use Cases This specific model is commonly found in: 1. **Networking Hardware:** Routers, switches, and high-speed modems. 2. **Embedded Systems:** Industrial PCs and automation controllers. 3. **Power Electronics:** Voltage regulators and power converters that generate significant heat in a small footprint. --- ### 4. Part Number Breakdown (Nomenclature) `ATS` - `17` - `G` - `06` - `C2` - `R0` * **ATS:** Manufacturer prefix. * **17:** Series identifier (Push-Pin series). * **G:** Fin/Body material and coating style. * **06:** Specific height/size configuration. * **C2:** Thermal performance/Attachment code. * **R0:** Revision/RoHS compliance status.