CA-RSPNMA002
AI

The **CA-RSPNMA002** is a specialized electronic RF (Radio Frequency) adapter cable, commonly used in telecommunications and networking to bridge different connector interfaces.
Below is a detailed breakdown of its electronic parts and specifications.
---
## 1. Component Overview
This part is essentially an **RF Pigtail Adapter**. It consists of three primary elements: two different connectors and a length of coaxial cable.
| Component | Specification | Description |
| :--- | :--- | :--- |
| **Connector A** | RP-SMA Male | Reverse Polarity SMA with an internal thread and a "socket" center. |
| **Connector B** | N-Type Male | Large, threaded connector with a "pin" center, common in outdoor gear. |
| **Cable Type** | LMR-195 (or equivalent) | A low-loss flexible coaxial cable designed for high frequencies. |
| **Length** | ~2 feet (typical) | Standard length for short-range equipment interconnection. |
---
## 2. Electronic Characteristics
Because this is an RF component, its "electronics" are defined by its physical geometry and material properties to ensure signal integrity.
### Impedance
* **50 Ohms:** This is the standard impedance for data and RF transmission. Matching this impedance prevents signal reflections (VSWR) that could damage transmitters.
### Frequency Range
* **0 to 6 GHz:** It is designed to handle signals for common wireless standards, including:
* **2.4 GHz** (Wi-Fi 802.11b/g/n)
* **5 GHz** (Wi-Fi 802.11a/ac/ax)
* **LTE/4G/5G** cellular frequencies.
### Signal Loss (Attenuation)
* The cable uses a **double-shielded** design to minimize electromagnetic interference (EMI).
* **LMR-195** provides significantly lower loss compared to thinner cables like RG-174, making it suitable for maintaining signal strength between an Access Point and an external antenna.
---
## 3. Physical Construction Materials
The electronic performance is highly dependent on the plating and insulation:
1. **Center Conductors:** Usually **gold-plated brass** or copper to ensure maximum conductivity and prevent oxidation.
2. **Dielectric:** Usually **PTFE (Teflon)**, which acts as an insulator to maintain the 50-ohm spacing between the core and the shield.
3. **Outer Jacket:** **PE (Polyethylene)** or PVC, providing UV protection for outdoor deployments.
---
## 4. Common Use Case
This cable is most frequently used to connect a **Wi-Fi Router/Access Point** (which typically uses RP-SMA ports) to a **Large Outdoor Antenna** or an **Arrester** (which typically uses N-Type ports).
- ⤷
What is the difference between SMA and RP-SMA connectors?
- ⤷ How much signal loss (dB) should I expect per foot with this cable?
- ⤷ Can this cable be used for outdoor weather-exposed installations?