CFS-0801TB
AI

The **CFS-0801TB** is a high-quality **DIP switch** (Dual In-line Package) commonly used in industrial electronics, telecommunications, and consumer devices to manually set binary configurations.
---
### 1. Key Technical Specifications
The "08" in the part number typically signifies the number of positions (switches) available on the component.
| Parameter | Specification |
| :--- | :--- |
| **Type** | DIP Switch (Slide/Piano type) |
| **Number of Positions** | 8-Position |
| **Contact Rating** | 25mA, 24V DC |
| **Dielectric Strength** | 500V AC for 1 minute |
| **Insulation Resistance** | 100MΩ min. at 500V DC |
| **Operating Temperature** | -40°C to +85°C |
| **Termination Style** | Through-hole (THT) or SMT (depending on variant) |
---
### 2. Physical Characteristics
* **Pitch:** Usually 2.54mm (0.1 inch), making it compatible with standard breadboards and PCB layouts.
* **Material:** Thermoplastic UL 94V-0 housing for high heat resistance.
* **Contacts:** Gold-plated or tin-plated contacts to prevent oxidation and ensure reliable switching over many years.
* **Tape Seal:** The "TB" suffix often indicates **Tube Packaging** or **Top Tape Seal**, allowing the component to undergo automated wave soldering and cleaning without internal contamination.
---
### 3. Functional Applications
The CFS-0801TB acts as a set of 8 independent SPST (Single Pole Single Throw) switches. Common use cases include:
1. **Addressing:** Setting unique ID codes for nodes in a RS-485 or DMX network.
2. **Configuration:** Selecting hardware modes (e.g., baud rate, output voltage, or sensor sensitivity) without needing a software interface.
3. **Security:** Manual "Key" setting for garage door openers or older remote controls.
4. **Prototyping:** Providing manual logic inputs (HIGH/LOW) for microcontrollers during development.
---
### 4. Typical Internal Circuitry
Each of the 8 switches works independently. When a switch is pushed to the **ON** position, it closes the circuit between the top pin and the bottom pin directly below it.
```text
[ Switch ON ] [ Switch OFF ]
| | | |
(Pin 1) (Pin 16) (Pin 1) (Pin 16)
|_______| | X |
(Closed) (Open)
```
- ⤷What is the difference between SMT and Through-hole versions of the CFS series?
- ⤷ How do I calculate the binary value of an 8-position DIP switch?
- ⤷ What are the recommended soldering temperatures for CFS-0801TB?