FCLM635S20LD2
AI

The **FCLM635S20LD2** is a specific electronic component, typically categorized as a **Laser Diode Module**. It is widely used in industrial alignment, medical equipment, and sensing applications.
Below is a detailed breakdown of its electronic characteristics and specifications.
---
## 1. Core Specifications
The technical parameters of the FCLM635S20LD2 define its performance and power requirements.
| Parameter | Specification (Typical) |
| :--- | :--- |
| **Wavelength** | 635 nm (Visible Red Light) |
| **Optical Output Power** | 20 mW |
| **Operating Voltage** | 3.0V - 5.0V DC |
| **Operating Current** | < 100 mA |
| **Beam Shape** | Line or Dot (Model specific) |
| **Operating Temperature** | -10°C to +50°C |
---
## 2. Key Electronic Components
The module is not just a raw diode; it consists of an integrated assembly:
### A. Laser Diode (LD)
The heart of the component is a semiconductor laser diode. At 635 nm, it provides a "brighter" red appearance to the human eye compared to the standard 650 nm diodes, despite having the same power output.
### B. Driver Circuit (APC/ACC)
Most FCLM series modules include an internal **Automatic Power Control (APC)** circuit.
* **Function:** It uses a feedback loop (via a photodiode) to maintain constant optical output power even if the temperature fluctuates or the battery voltage drops.
* **Protection:** It prevents the diode from "thermal runaway," which could lead to instantaneous permanent damage.
### C. Optical Lens System
The "FCLM" designation often implies a **focusable** or **collimated** lens.
* **Material:** Usually glass or high-grade plastic.
* **Adjustment:** Allows the user to tighten the beam into a fine point or a specific line width.
---
## 3. Wiring and Pinout
The module typically features two or three lead wires:
* **Red Wire:** Positive Supply ($V_{cc}$). Usually 3V to 5V.
* **Black Wire:** Ground (GND).
* **Yellow/White (Optional):** TTL Modulation. Some versions allow for high-speed switching (on/off) via a micro-controller (like an Arduino) for pulse-width modulation (PWM).
---
## 4. Operational Precautions
To ensure the longevity of the FCLM635S20LD2, consider these electronic safety measures:
1. **Heat Dissipation:** Although 20mW is relatively low power, the module should be mounted in a metal heat sink (usually aluminum) if used continuously.
2. **ESD Sensitivity:** Like all laser diodes, this part is extremely sensitive to **Electrostatic Discharge**. Always use a grounding strap when handling.
3. **Voltage Spikes:** Ensure the power supply is regulated. A spike above 5.5V can instantly destroy the internal driver or the diode.
---
- ⤷
What is the difference in visibility between 635nm and 650nm laser diodes?
- ⤷ How do I interface this module with an Arduino for PWM control?
- ⤷ What are the specific cooling requirements for a 20mW laser module?