FTG-86-R
AI

The **FTG-86-R** is a high-performance, ruggardized electronic component, typically categorized as a **Precision Glass-to-Metal Seal Feedthrough**. These parts are critical in hermetic packaging, ensuring electrical signals or power can pass through a pressurized or vacuum-sealed barrier without compromising the environment.
---
## 1. Technical Specifications
The "86" series usually refers to specific pin configurations or body diameters, while the "R" suffix often denotes a "Right-angle" lead configuration or a specific "RoHS" compliance status depending on the manufacturer (commonly associated with brands like **Sinclair** or specialized RF connector firms).
| Feature | Description |
| :--- | :--- |
| **Material (Body)** | Kovar or Stainless Steel (for thermal expansion matching) |
| **Insulation** | Borosilicate Glass or High-Alumina Ceramic |
| **Pin Material** | Gold-plated Nickel/Iron alloys |
| **Seal Type** | Hermetic (Glass-to-Metal) |
| **Operating Temp** | -65°C to +200°C (standard range) |
---
## 2. Key Electronic Functions
### A. Hermeticity
The primary electronic role is to maintain a vacuum-tight seal (often leak rates less than $1 \times 10^{-8}$ cc/sec Helium). This protects internal sensitive electronics (like oscillators or sensors) from moisture, oxidation, and atmospheric contaminants.
### B. Electrical Isolation
The glass or ceramic bead acts as a high-dielectric insulator. It prevents the conductive pin from shorting against the metal housing (ground).
* **Insulation Resistance:** Typically $>10,000$ Megohms at 500 VDC.
### C. Impedance Matching (RF Applications)
If the FTG-86-R is used in RF/Microwave circuits:
* The geometry of the pin and the dielectric constant of the glass are calculated to maintain a specific impedance (usually **50 Ohms**).
* This minimizes signal reflection (VSWR) as the signal transitions from a PCB to an external connector.
---
## 3. Application Areas
The FTG-86-R is commonly found in high-reliability sectors:
1. **Aerospace:** Satellite communication modules.
2. **Defense:** Radar systems and electronic warfare (EW) housing.
3. **Oil & Gas:** Downhole drilling sensors where high pressure and heat are present.
4. **Medical:** Implantable devices requiring biocompatible hermetic seals.
---
## 4. Connection Interface
The part typically features two ends:
* **Internal Side:** Often a "solder bucket" or a straight pin for wire bonding or PCB soldering.
* **External Side:** A threaded or flange-mounted interface (often SMA or custom) for rugged external cable attachment.
- ⤷
What is the maximum voltage rating for the FTG-86-R feedthrough?
- ⤷ How does the thermal expansion coefficient of Kovar benefit these glass-to-metal seals?
- ⤷ Are there specific soldering temperatures recommended for the gold-plated pins?