Motore di ricerca datesheet componenti elettronici
  Italian  ▼
ALLDATASHEETIT.COM

X  

  • LMS-4W2-R/Q

  • AI
    The **LMS-4W2-R/Q** is a high-performance **Laser Measurement Sensor** typically manufactured by companies like OPTEX FA. It belongs to a category of Time-of-Flight (ToF) or phase-shift displacement sensors designed for long-range, high-precision industrial automation. --- ## 1. Core Electronic Components & Architecture The device integrates several sophisticated electronic subsystems to achieve sub-millimeter precision over long distances. ### A. The Optical Engine * **Laser Diode (Emitter):** Usually a Class 2 Red Laser (visible) or Infrared laser. It pulses light at specific frequencies. * **Receiver (Photodiode):** A high-sensitivity APD (Avalanche Photodiode) or CMOS array that detects the reflected photon return. ### B. Signal Processing Unit * **FPGA/ASIC Chip:** Processes the "Time of Flight" calculations. Since light travels at ~300,000 km/s, the internal electronics must resolve time in picoseconds. * **Amplifier Circuit:** Boosts the weak return signal from dark or non-reflective surfaces to ensure a stable reading. ### C. Output & Interface Electronics * **D/A Converter:** Converts the digital measurement into an analog voltage (0-10V) or current (4-20mA) signal. * **Switching Transistors:** NPN or PNP open-collector outputs for limit triggers (e.g., detecting if an object is within a specific zone). --- ## 2. Technical Specifications Table | Feature | Specification Details | | :--- | :--- | | **Detection Method** | Laser Beam (Time of Flight or Phase Difference) | | **Light Source** | Red Laser (Visible), Wave length approx. 650-660nm | | **Supply Voltage** | 12 to 24 VDC (±10% ripple) | | **Power Consumption** | Approx. 100mA to 150mA | | **Analog Output** | 4 to 20 mA (Load impedance < 300Ω) | | **Control Output** | NPN/PNP Open Collector (Max 100mA/30VDC) | | **Response Time** | Configurable (often 1.5ms to 50ms depending on accuracy settings) | | **Protection Circuit** | Reverse polarity, Overcurrent, and Short-circuit protection | --- ## 3. Wiring and Pin Configuration The "Q" in the suffix usually denotes a **M12 5-pin or 8-pin Connector** version, while the "R" often refers to the specific output logic or range configuration. ### Typical Wiring Logic: 1. **Brown:** +V (12-24V DC) 2. **Blue:** 0V (GND) 3. **Black:** Control Output 1 (Digital) 4. **White:** Analog Output (4-20mA / 0-10V) 5. **Gray:** External Teach / Remote Reset --- ## 4. Key Electronic Features for Industrial Use * **Linearlity Compensation:** The internal microprocessor applies a polynomial correction to ensure the 4-20mA output is perfectly linear relative to the physical distance. * **Ambient Light Suppression:** Electronic filters (optical and digital) allow the sensor to function under high-intensity indoor lighting or partial sunlight without saturation. * **Temperature Compensation:** Internal thermistors monitor the laser diode's temperature to adjust the bias current, preventing "drift" in measurement as the unit warms up. ---
    ✨ Follow-up Questions
    • ⤷ What is the maximum measurement range for the LMS-4W2-R/Q model?
    • ⤷ How do you calibrate the analog output for a specific distance window?
    • ⤷ Does this sensor support IO-Link for digital communication?