M22-R10K
AI

The **M22-R10K** is a high-quality industrial potentiometer part of the RMQ-Titan series manufactured by **Eaton (formerly Moeller)**. It is designed for panel mounting to provide variable resistance control for automation and industrial circuits.
---
## 1. Technical Specifications
The "10K" in the part number signifies its nominal resistance value. Below are the core electronic and mechanical specifications:
| Parameter | Value |
| :--- | :--- |
| **Resistance** | 10 kΩ (Kilo-ohms) |
| **Resistance Tolerance** | ±10% |
| **Power Rating** | 0.5 Watts |
| **Mounting Hole Diameter** | 22.5 mm (Standard Industrial Size) |
| **Protection Rating** | IP66 (Front side - Dust and Water tight) |
| **Terminal Type** | Screw Terminals (P1, P2, P3) |
| **Rotation Angle** | 285° |
---
## 2. Pinout and Connection
The M22-R10K features three screw terminals located on the back of the unit. These function like a standard three-terminal variable resistor:
1. **Terminal 1 (Left):** End of the resistive element.
2. **Terminal 2 (Center/Wiper):** The moving contact that varies the resistance.
3. **Terminal 3 (Right):** Opposite end of the resistive element.
### Wiring Example (Voltage Divider)
```cpp
// Common usage in VFDs (Variable Frequency Drives)
[ +10V Source ] ----> Terminal 1
[ Control Signal ] <---- Terminal 2 (Wiper)
[ Ground/COM ] ----> Terminal 3
```
---
## 3. Key Electronic Features
* **Linear Taper:** The resistance changes linearly with the rotation of the knob, making it predictable for manual adjustments.
* **Integrated Design:** Unlike traditional potentiometers that require a separate bracket and knob, the M22-R10K is an **all-in-one unit**. The knob and resistive element are integrated into a single 22mm housing.
* **Galvanic Isolation:** Designed for industrial environments, ensuring the operator is isolated from the internal electrical signals.
---
## 4. Common Applications
* **Speed Control:** Adjusting the frequency of a Variable Frequency Drive (VFD) to change motor speed.
* **Set-point Adjustment:** Changing temperature or pressure thresholds in PLC systems.
* **Dimming:** Controlling light intensity in industrial signaling systems.
* **Human-Machine Interface (HMI):** Acting as a physical input for analog values in a control panel.
- ⤷
How do I wire the M22-R10K to a Variable Frequency Drive (VFD)?
- ⤷ What is the difference between the M22-R10K and the M22-R1K?
- ⤷ Is there a 4-20mA version of this potentiometer?