Motore di ricerca datesheet componenti elettronici
  Italian  ▼
ALLDATASHEETIT.COM

X  

  • M2TT-11-R2

  • AI
    ## M2TT-11-R2: Electronic Component Overview The **M2TT-11-R2** belongs to the **M2 series** of miniature toggle switches, manufactured by **NKK Switches**. It is specifically designed for PC board mounting and is known for its high reliability and "logic-level" switching capabilities. --- ### 1. Key Technical Specifications | Parameter | Specification | | :--- | :--- | | **Circuit Type** | SPDT (Single Pole Double Throw) | | **Switch Function** | ON - NONE - ON | | **Contact Rating** | 0.4VA Max @ 28V AC/DC Max (Logic Level) | | **Mounting Type** | Through Hole, Right Angle (Horizontal) | | **Termination Style** | PC Pin | | **Actuator Style** | Standard Bat Lever | | **Operating Temperature** | -30°C to +85°C | --- ### 2. Electronic & Mechanical Characteristics #### A. Contact Mechanism The "R2" designation typically refers to the **Gold-plated contacts**. Because it is rated at 0.4VA (Volt-Ampere), it is intended for low-energy circuits (logic levels). Gold prevents oxidation, ensuring a stable connection even when the voltage is too low to "arc" through typical surface contamination. #### B. Anti-Stackup Design The M2 series features a **staggered terminal** layout. This design provides better stability when soldering to a Printed Circuit Board (PCB) and prevents the switch from tilting during the assembly process. #### C. Environmental Sealing Most models in this series utilize an **ultrasonic welding** of the housing and a **molded-in terminal structure**. This prevents flux, solvents, and other contaminants from entering the switch body during automated soldering and cleaning processes. --- ### 3. Application Use Cases Due to its small footprint and horizontal orientation (Right Angle), the M2TT-11-R2 is commonly used in: * **Handheld Devices:** Where space is limited and the switch must be accessible from the side of the casing. * **Telecommunications:** Signal switching in routers or modems. * **Medical Instrumentation:** Low-power control panels. * **Testing Equipment:** Mode selection in multimeters or oscilloscopes. --- ### 4. Terminal Configuration As an **SPDT** switch, it has three terminals: 1. **Common (Center):** The input signal. 2. **Position 1:** Connected to common when the lever is in one direction. 3. **Position 2:** Connected to common when the lever is flipped to the opposite direction.
    ✨ Follow-up Questions
    • ⤷ What is the difference between logic-level (0.4VA) and power-rated switches?
    • ⤷ Does the M2TT-11-R2 require a specific footprint for PCB design?
    • ⤷ Are there waterproof versions of the NKK M2 series switches?