AI

The **MA62TAA-R** is a specific model of an **Electromechanical Buzzer** (or transducer), typically manufactured by companies like Mallory Sonalert Products. These components are designed to convert electrical energy into audible sound.
Below is a breakdown of its technical specifications, features, and electrical characteristics.
---
### 1. Technical Specifications
| Parameter | Description / Value |
| :--- | :--- |
| **Component Type** | Electromechanical Transducer (Buzzer) |
| **Operating Voltage** | Typically 1.5V to 10V DC (Standard range) |
| **Rated Voltage** | 6V DC (Common for this series) |
| **Frequency** | ~2800 Hz to 3100 Hz |
| **Sound Pressure Level (SPL)** | 85 dB to 95 dB @ 10cm |
| **Current Consumption** | 30mA to 50mA |
| **Mounting Type** | Through-hole / PC Pins |
| **Termination** | Radial Lead / Pin terminal |
---
### 2. Key Features
* **High Output:** Despite its small size, it produces a high-decibel output suitable for industrial or commercial alarms.
* **DC Operation:** Unlike piezo elements that require an external oscillating circuit, many versions of the "MA" series are self-contained (though some require external circuitry—refer to the specific datasheet for "Transducer" vs "Indicator" status).
* **Durability:** Built for consistent performance over long periods of time.
* **Compact Form Factor:** The "R" suffix often denotes a specific physical orientation or RoHS compliance depending on the manufacturer's naming convention.
---
### 3. Pin Configuration & Application
The MA62TAA-R generally features two pins for PCB mounting:
1. **Positive (+):** Connected to the voltage supply (VCC).
2. **Negative (-):** Connected to the ground (GND).
#### Common Use Cases:
* **Consumer Electronics:** Microwave ovens, timers, and alarm clocks.
* **Medical Equipment:** Warning indicators for patient monitoring.
* **Industrial Panels:** Feedback for button presses or error states.
---
### 4. Circuit Integration Example
To drive this buzzer using a microcontroller (like an Arduino), you should use a transistor to handle the current, as the I/O pins may not provide enough amperage.
```cpp
// Simple Arduino Beep Code
const int buzzerPin = 9; // Connected to the base of a transistor
void setup() {
pinMode(buzzerPin, OUTPUT);
}
void loop() {
digitalWrite(buzzerPin, HIGH); // Sound ON
delay(1000);
digitalWrite(buzzerPin, LOW); // Sound OFF
delay(1000);
}
```
- ⤷Does the MA62TAA-R require an external oscillator or is it self-driven?
- ⤷ What is the specific current draw at 6V for this model?
- ⤷ Are there waterproof versions of the MA62TAA series?