SCI1008LP-R56G
AI

The **SCI1008LP-R56G** is a high-performance, surface-mount (SMD) wire-wound ceramic core chip inductor. It is part of a series often utilized in high-frequency RF applications due to its excellent Q-factor and stable inductance.
---
### 1. Key Technical Specifications
| Parameter | Value | Notes |
| :--- | :--- | :--- |
| **Inductance** | 560 nH (0.56 µH) | Measured at 25 MHz |
| **Tolerance** | ±2% (G) | High precision rating |
| **Case Size** | 1008 (2520 Metric) | 2.5mm x 2.0mm footprint |
| **DC Resistance (DCR)** | 1.33 Ω (Max) | Affects power loss/heating |
| **Rated Current** | 400 mA (Max) | Maximum continuous DC current |
| **Self-Resonant Freq (SRF)** | 350 MHz (Min) | Frequency where it stops behaving as an inductor |
| **Quality Factor (Q)** | 45 (Min) | Measured at 100 MHz |
---
### 2. Physical and Material Characteristics
* **Core Material:** Ceramic. Unlike ferrite cores, ceramic cores do not saturate and provide high stability across wide temperature ranges and frequencies.
* **Construction:** Wire-wound. A copper wire is wrapped around a ceramic body, which typically offers higher current ratings and lower DC resistance compared to multilayer inductors.
* **LP Designation:** This often stands for **Low Profile**, indicating the component is designed with a reduced height for slim electronic assemblies.
---
### 3. Application Use-Cases
The SCI1008LP-R56G is primarily found in RF (Radio Frequency) and high-speed signal processing circuits:
* **Impedance Matching:** Used in the front-end of wireless transceivers to match antenna impedance.
* **Filtering:** Acts as a high-pass or low-pass filter component in Wi-Fi, Bluetooth, and cellular modules.
* **Oscillators:** Used in LC tank circuits for frequency generation.
* **Signal Decoupling:** Isolating high-frequency noise from DC power lines in sensitive RF stages.
---
### 4. Part Number Breakdown
Understanding the nomenclature helps in selecting alternatives:
* **SCI:** Series prefix (Surface Mount Chip Inductor).
* **1008:** Physical dimensions (0.10" x 0.08").
* **LP:** Low Profile design.
* **R56:** Inductance value (R = decimal point; 0.56 µH = 560 nH).
* **G:** Tolerance code (G = ±2%).
- ⤷
How does the 'Low Profile' height compare to standard 1008 inductors?
- ⤷ Can this inductor be used in power supply switching circuits?
- ⤷ What are the thermal limitations for this part during reflow soldering?