AI

The **T225T-R10-KB** is a specific model of a **Rotary Encoder** (often integrated with a potentiometer or switch functionality), commonly used in audio equipment, industrial controls, and household appliances.
Below is a detailed breakdown of its electronic components and specifications.
---
### 1. General Specifications
The T225T-R10-KB is typically a 12mm or 20mm sized encoder known for its tactile feedback and durability.
| Feature | Specification |
| :--- | :--- |
| **Type** | Incremental Rotary Encoder |
| **Pulse count** | Typically 12 to 24 pulses per 360° |
| **Switch Integration** | Includes a Push-Momentary Switch |
| **Shaft Type** | "K" Type (Knurled/Splined) or "B" Type (Flat/D-shape) |
| **Mounting** | Through-hole (PCB Mount) |
| **Rotational Life** | ~30,000 cycles |
---
### 2. Electronic Component Breakdown
#### A. The Encoder Module (A/B Phase)
The device uses two internal mechanical contacts (Phase A and Phase B) to detect rotation.
* **Quadrature Output:** By shifting the output signals 90 degrees out of phase, the connected microcontroller can determine both the **speed** and the **direction** (Clockwise vs. Counter-Clockwise) of the turn.
* **Detents:** The "R10" often refers to the detent torque or the number of mechanical "clicks" felt per rotation.
#### B. The Integrated Push-Switch
The "T" in the prefix usually denotes a **Top-push** tactile switch.
* **Function:** Actuated by pressing the shaft downwards.
* **Circuitry:** Normally Open (NO). It closes the circuit when pressed.
#### C. The Resistor/Terminal Interface
* **Terminals:** Usually has 5 pins (3 for the encoder A/B/Common, 2 for the push-switch).
* **Rating:** Typically handles low voltage/current (e.g., 5V DC, 10mA).
---
### 3. Pinout Configuration
Standard configuration for this series follows this layout:
| Pin Number | Function | Description |
| :--- | :--- | :--- |
| **A** | Channel A | Output signal for pulse counting |
| **C** | Common | Ground / Signal Return |
| **B** | Channel B | Output signal (90° offset from A) |
| **S1** | Switch 1 | Input for Push-button |
| **S2** | Switch 2 | Output for Push-button |
---
### 4. Circuit Implementation (Example)
To use this part with a microcontroller (like an Arduino or ESP32), pull-up resistors are required to prevent floating signals.
```cpp
// Example: Reading the T225T Encoder Pins
#define PIN_A 2
#define PIN_B 3
#define PIN_SW 4
void setup() {
pinMode(PIN_A, INPUT_PULLUP);
pinMode(PIN_B, INPUT_PULLUP);
pinMode(PIN_SW, INPUT_PULLUP);
}
```
---
### 5. Part Number Suffix Meaning
* **T225T:** Series identifier (Incremental mechanical encoder).
* **R10:** Often indicates the resistance value (if a potentiometer is integrated) or the detent count/torque rating.
* **KB:** Refers to the **Shaft style** (Knurled) and **Bush length** (the threaded portion height).
- ⤷
What is the difference between an incremental and absolute encoder?
- ⤷ How do I debounce the mechanical noise from this encoder's signal?
- ⤷ What are the specific torque values for the R10 variant?