UP2B-330-R
AI

The **UP2B-330-R** is a specific model of power inductor manufactured by **Eaton** (formerly Cooper Bussmann). It is part of the Uni-Pac (UP) series, known for its high energy storage and compact surface-mount design.
---
## 1. Technical Specifications
Below are the primary electrical and physical characteristics of the UP2B-330-R:
| Parameter | Value |
| :--- | :--- |
| **Inductance** | 33 $\mu$H |
| **Tolerance** | ±20% |
| **Current Rating (Irms)** | 1.9 Amps (Typical) |
| **Saturation Current (Isat)** | 2.0 Amps (Typical) |
| **DC Resistance (DCR)** | 0.0820 $\Omega$ (Typical) |
| **Operating Temperature** | -40°C to +125°C |
| **Package Type** | SMD (Surface Mount Device) |
| **Core Material** | Ferrite |
---
## 2. Part Number Breakdown
Understanding the nomenclature helps in identifying variants:
* **UP2B**: The series name and physical size/form factor.
* **330**: The inductance code. The first two digits are significant figures, and the third is the multiplier ($33 \times 10^0 = 33$).
* **R**: Indicates that the part is **RoHS compliant** (Lead-Free).
---
## 3. Key Features
* **Shielded Construction:** The inductor is designed to minimize Electromagnetic Interference (EMI), making it suitable for noise-sensitive circuits.
* **High Power Density:** Provides a large amount of energy storage relative to its small physical footprint.
* **Rugged Design:** The ferrite core is encased, providing better mechanical protection during the assembly process.
---
## 4. Common Applications
The UP2B-330-R is primarily used in power management circuits:
1. **DC-DC Converters:** Acts as an energy storage element in Buck, Boost, or SEPIC converters.
2. **Voltage Regulators:** Used in Point-of-Load (POL) modules for computers and servers.
3. **Filtering:** Used in output filters to smooth out ripple current in power supplies.
4. **Consumer Electronics:** Found in laptops, LED drivers, and battery-powered handheld devices.
---
## 5. Physical Dimensions (Typical)
While you should always consult the official datasheet for PCB layout (footprint), the UP2B series typically follows these dimensions:
* **Length:** ~13.9 mm
* **Width:** ~9.4 mm
* **Height:** ~6.0 mm
- ⤷
What is the difference between Irms and Isat in the context of this inductor?
- ⤷ Are there smaller surface-mount alternatives to the UP2B series for tighter PCB layouts?
- ⤷ How does the ferrite core material affect the performance of the UP2B-330-R at high frequencies?