The **W2CE-53Y-R/CE** is a high-performance industrial AC axial fan manufactured by **Oriental Motor**. It belongs to the W-Series, designed specifically for cooling electronic equipment, control panels, and server racks. --- ### 🛠️ Technical Specifications The following table outlines the primary electronic and mechanical characteristics of the device: | Parameter | Specification Details | | :--- | :--- | | **Input Voltage** | 200/220/230 VAC (Single-Phase) | | **Frequency** | 50 / 60 Hz | | **Current Rating** | 0.12 A to 0.14 A (depending on frequency) | | **Power Consumption** | 15 W to 17 W | | **Speed (RPM)** | 2700 / 3100 RPM | | **Max Air Flow** | 1.45 / 1.70 m³/min (51.2 / 60 CFM) | | **Noise Level** | 35 / 40 dB (A) | | **Dimensions** | 119 mm x 119 mm x 38 mm | --- ### ⚡ Key Electronic Components & Features 1. **Induction Motor:** The core of the unit is a single-phase shaded-pole or capacitor-run induction motor. These are known for high reliability and the ability to operate continuously for years without maintenance. 2. **Impedance Protection:** The "R" in the suffix often denotes that the motor is **Impedance Protected**. This means that if the fan blades are locked or obstructed, the coil's impedance is high enough to prevent the current from rising to a level that would cause a fire or burn out the motor. 3. **Lead Wire Connection:** The "Y" in the model name typically indicates a specific lead wire configuration (usually 2-wire) for easy integration into AC power rails. 4. **CE Compliance:** The "/CE" suffix confirms that the part meets European Union safety, health, and environmental protection requirements, ensuring electromagnetic compatibility (EMC) and low voltage safety. --- ### 🏗️ Construction Materials * **Frame:** Die-cast aluminum (provides heat dissipation and structural rigidity). * **Blades:** Polycarbonate (Glass-fiber reinforced) or Steel, depending on the specific sub-series. * **Bearing:** High-quality dual ball bearings for extended life (typically rated for 25,000 to 50,000 hours). --- ### 📂 Wiring Reference While simple, the wiring follows standard AC color coding: ```text [Power Source 230VAC] | +---- (Brown/Black) ---- [Fan Lead 1] | +---- (Blue/White) ---- [Fan Lead 2] ``` *(Note: Always check the specific label on the frame for terminal polarity/wiring colors before installation.)*