GENERAL DESCRIPTION
The ML9205-01 is a dot matrix vacuum fluorescent display tube controller driver IC which displays characters, numerics and symbols.
Dot matrix vacuum fluorescent display tube drive signals are generated by serial data sent from a micro-controller. A display system is easily realized by internal ROM and RAM for character display.

FEATURES
• Logic power supply (VDD) : 3.3 V±10% or 5.0 V±10%
• Fluorescent display tube drive power supply (VDISP) : 3.3 V±10% or 5.0 V±10%
• Fluorescent display tube drive power supply (VFL) : –20 to –60 V
• VFD driver output current
    (VFD driver output can be connected directly to the fluorescent display tube. No pull-down resistor is required.)
    · Segment driver (SEG1 to SEG35) : –5.0 mA (VFL= –60 V)
    · Segment driver (AD1 to AD4) : –10.0 mA (VFL= –60 V)
    · Grid driver (COM1 to COM24) : –50.0 mA (VFL= –60 V)
• General output port output current
    · Output driver (P1 to P4) : ±1.0 mA (VDD = 3.3 V±10%) ±2.0 mA (VDD = 5.0 V±10%)
• Content of display
    · CGROM 5 x 7 dots : 240 types (character data)
    · CGRAM 5 x 7 dots : 16 types (character data)
    · ADRAM 24 (display digit) x 4 bits(symbol data)
    · DCRAM 24 (display digit) x 8 bits(register for character data display)
    · General output port 4 bits (static operation)
• Display control function
    · Display digit : 9 to 24 digits
    · Display duty (brightness adjustment) : 8 stages
    · All lights ON/OFF
• 3 interfaces with microcontroller : DA, CS, CP (4 interfaces when RESET is added)
• 1-byte instruction execution (excluding data write to RAM)
• Built-in oscillation circuit (external R and C)
• Package options:
    80-pin QFP package (QFP80-P-1414-0.65-K) (Product name : ML9205-01GP)
    80-pin QFP package (QFP80-P-1420-0.80-BK)(Product name : ML9205-01GA)