General Description

The MX210Q is a very low cost dual-axis acceleration sensor on a monolithic IC. With no moving parts, the device is extremely reliable and is manufactured on a submicron CMOS process enabling small geometries and small die size, resulting in low overall cost and high functionality. The MX210Q is primarily designed for applications requiring high performance and where overall system cost is a driving factor in component selection. The MX210Q measures acceleration with a full-scale range of up to ±10g and produces an Analog signal output. The X,Y accelerometer outputs are scaled proportionately to the VDD, VDA supply voltage with the scale of 44%.Typical noise floor is 750 µg/√Hz rms, allowing signals below 1 .0 milli-g to be resolved in 1 Hz bandwidth.

Frequency response extends to 40 Hz. The frequency response can be extended to 160 Hz with the implementation of a simple external circuit. See Application Note (AN-00MX-003).

Features

• Dual axis acceleration outputs

• Analog outputs, ratiometric

• 1.0 mg Resolution in 1Hz bandwidth

• 40 Hz Bandwidth expandable to 160 Hz See Application Note (AN-00MX-003)

• Quiescent Supply Voltage: 3.5 mA

• 0g output voltage 2.315V (with 5V supply)

• 50,000g shock survival

• 2.70V to 5.25V Single Supply

• On-chip mixed signal processing

• Continuous sensors self test

• Temperature sensor output (Tout) 5mV/°K

• Packaged in 8 pin LCC SMD or 10 pin TO-100 THRU-HOLE

• Hermetically sealed packaging

• Reference voltage (VREF) 2.50V

Applications

• Automotive - Vehicle Security/Active Suspension/ABS/HED Angle Control

• Security - Gas Line/Elevator/Fatigue Sensing

• Office Automation Equipment - Computer Peripherals/Disk Drives/PDA’s/Mouse Smart Pens/Cell Phones/Printer Head Acceleration Sensor

• Gaming - Joystick/RF Interface/Menu Selection

• White Goods - Spin Vibration Control