Description
Color: White to light tan Base: Modified epoxy Form: Unsupported film (with a heavy green plaid printed backing liner and a thin, rose-colored polyethylene separator liner) Normal Caliper Range: 50 ± 5 mils (without liners) Normal Uncured Density Range: 50 ± 5 lbs./cubic foot Normal Weight Range: 0.165 - 0.255 lbs./sq. ft. (calculated from above caliper and density ranges) Volatile Loss on Cure: Less than 1% after 1 hour at 250°F (121°C) with a 10°F/minute warmup rate. Suggested Cure Cycle for a 50 mil Thickness: 250°F (121°C) for 60 minutes with a 10°F/minute warmup rate Cured Film Thickness: a.) 250°F (121°C Cure, 70 mils (approx.) b.) 350°F (177°C Cure, 80 mils (approx.)

Features
■ -67°F to 250°F (-55°C to 121°C) temperature range when cured at 250°F (121°C) and high performance over a -67°F to 350°F (-55°C to 177°C) temperature range when cured at 350°F (177°C). Technical Data June, 2002