INTRODUCTION
Purpose
This manual provides information on the hardware configuration
and use of the RSL15 Evaluation and Development Board.
The Evaluation and Development Board (referred to as the EVB) is
designed to be used with the RSL15 Software development kit. It is
intended for evaluating the performance and capabilities of RSL15,
and for developing software applications for this device. The Software
Development Kit is available at www.onsemi.com/rsl15.
Conventions
In this manual, component and pin names are shown in
a CAPITALIZED MONOSPACE font.
Manual Organization
The RSL15 Evaluation & Development Board User Guide contains
the following sections:
• Introduction” describes the purpose of this manual, explains how
the manual is organized, and provides a list of suggested reading for
more information.
• Board Design and Overview provides an overview of the
Evaluation and Development Board as described in this manual.
• Configuration provides detailed information about the Evaluation
and Development Board. This chapter contains information on the
following topics:
♦ Automatic switching power supply
♦ SEGGER® J−Link® on−board Debug Port
♦ RF Outputs
♦ General Purpose Input/Output (GPIO)
♦ Test Points
♦ Indicator LEDs
Further Reading
For any technical information not covered in this manual, refer to
the following documents:
• The searchable HTML documentation
• RSL15 Evaluation and Development Board Schematics
• RSL15 Evaluation and Development Board 3D Model