EVAL-M1-IM240-A is a complete evaluation board including a 3-phase IPM for motor drive application. The kit
demonstrates Infineon’s IPM technology for motor drives.
Main features of CIPOS™ Micro intelligent power module IM240-M6Z1B and IM240-M6Y1B include:
 600 V 3-phase inverter including gate drivers & bootstrap function
 Low Vce(sat) RC-DF IGBT technology
 Temperature monitor
 Accurate overcurrent shutdown (±5 %)
 Fault reporting and programmable fault clear
 Advanced input filter with shoot-through protection
 Optimized dv/dt for loss and EMI trade offs
 Open-emitter for single and leg-shunt current sensing
 3.3 V logic compatible
 Isolation 1900 VRMS, 1 min
 UL certified
The evaluation board characteristics include:
 Nominal input voltage 220 VAC
 Maximum 250 W motor power output
 On board EMI filter
 Current sensing for each phase configured by default
 Over current protection
 Sensing of DC-link voltage
 Thermistor output
 Fault diagnostic output
 Measurement test-points compatible to standard oscilloscope probes
 PCB is 100 x 100 mm and has two layers with 35 μm copper each
 RoHS compliant