The NCP59150 series are high precision, very low dropout
(VLDO), low ground current positive voltage regulators that are
capable of providing an output current in excess of 1.5 A with a typical
dropout voltage lower than 300 mV at 1.5 A load current. The devices
are stable with ceramic output capacitors. This series consists of
Adjustable output voltage and fixed voltage versions.
The NCP59150 series can withstand up to 18 V max input voltage.
Internal protection features consist of output current limiting,
built−in thermal shutdown and reverse output current protection.
Logic level enable and error flag pins are available on the 5−pin and
8−pin versions.
The NCP59150 series Adjustable Voltage devices are available in
D2PAK−5 and DFN8 packages, the Fixed Voltage option are available
in D2PAK−5, D2PAK−3 and DFN8 packages.

Features
• Output Current in Excess of 1.5 A
• 300 mV Typical Dropout Voltage at 1.5 A
• Adjustable and Fixed Output Voltage Options
• Low Ground Current
• Fast Transient Response
• Stable with Ceramic Output Capacitor
• Logic Compatible Enable and Error Flag Pins
• Current Limit, Reverse Current and Thermal Shutdown Protection
• Operation up to 13.5 V Input Voltage
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices

Applications
• Consumer and Industrial Equipment Point of Regulation
• Servers and Networking Equipment
• FPGA, DSP and Logic Power Supplies
• Switching Power Supply Post Regulation
• Battery Chargers
• Functional Replacement for Industry Standard MIC29150,
MIC39150, MIC37150