Features and Benefits

• USB interface for LON FT networks for any
edge server, gateway, controller, or device,
including SmartServer™ IoT
• Compatible with IzoT Net Server, OpenLNS®
Server, LNS® Server and OpenLDV
applications
• Works with IzoT Net and LNS compatible
applications such as the IzoT Commissioning
Tool and LonMaker Integration Tool
• Compatible with SmartServer IoT
• Compact 72mm x29mm (2.8″ x 1.1″) boardlevel
form factor with 2.54mm center pin
headers for simple integration
• Powered by 3.3VDC input
• Source code available as download for a
Linux-compatible driver

Product Description

The U60 FT USB network interface module enables a controller or
computer to communicate with LON and IzoT™ networks via USB.
The compact boards include network and USB pin headers for simple
integration into any controller or device.
The U60 is an interface to LON/IP-FT and LON-FT and is compatible with
OpenLDV 5 and with hosts implementing the LON/IP stack which provides
source code for LON/IP and LON compatible protocol stacks.
The interface facilitates communication to everyday devices like pumps,
motors, valves, sensors, actuators and lights for process control, building
automation, energy management, transportation systems control and
telecommunications equipment management.
Tx and Rx signals provide an indication of LON packet transmission and
reception and a service signal communicates device status to the host via
the USB interface enabling the host controller to provide status indicators.
Optional on-board Tx, Rx and service LED indicators are available.