Axioline F, Temperature recording module, Analog inputs: 4 (for resistance temperature
detectors), connection technology: 2-, 3-, 4-conductor (shielded), transmission speed in the local
bus: 100 Mbps, Extreme conditions version, degree of protection: IP20, including bus base
module and Axioline F connectors

Product Description
The module is designed for use within an Axioline F station. It is used to acquire signals from resistive temperature sensors. The module supports
all common platinum and nickel sensors in accordance with DIN EN 60751 and SAMA. Cu10, Cu50, Cu53 sensors as well as various KTY8x
sensor types are also supported.

Your advantages
• 4 analog input channels for connecting resistance temperature detectors (RTDs)
• 500 Ω and 5 kΩ linear inputs
• Connection of sensors in 2-, 3-, and 4-conductor technology
• Integrated, digital sensor linearization
• Standardized measured value representation directly in °C, °F or Ω
• Measured value display in 16-bit format or floating point format
• Programmable filters
• Short-circuit protected inputs
• Temperature stability
• Very high level of noise immunity
• Low noise emission
• Installation monitoring by means of “Channel scout” function
• Can be used under extreme ambient conditions
• Extended temperature range of -40 °C ... +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)
• Partially coated PCBs
• Device rating plate stored