Axioline F, Bus coupler, PROFIBUS DP, D-SUB-9 female connector, transmission speed in the
local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F
connector

Product Description
The bus coupler is intended for use within a PROFIBUS network and represents the link to the Axioline F I/O system. Up to 63 Axioline F devices
can be connected to the bus coupler. A corresponding GSD file is available for integrating the Axioline F station into the programming system. It can
be downloaded at: phoenixcontact.net/product/2688530

Your advantages
• PROFIBUS connection via 9-pos. D-SUB socket
• Electrical isolation between PROFIBUS interface and logic
• Rotary coding switches for setting the PROFIBUS address
• DP/V1 for class 1 and class 2 masters
• PROFIBUS data transmission speed of 9.6 kbps to 12 Mbps
• Dynamic configuration is supported
• I&M functions
• Firmware can be updated
• Typical cycle time of the Axioline F local bus is around 10 μs
• Supports the operation of Axioline Smart Elements
• Supports passive Smart Elements (firmware version 2.20 or later)