Inline, Bus coupler, PROFINET, RJ45 jack, transmission speed in the local bus: 500 kbps / 2
Mbps, degree of protection: IP20

Product Description
The bus coupler is the link between a PROFINET network and the Inline installation system. Up to 63 Inline devices can be connected at any point
to an existing PROFINET network using the bus coupler.

Your advantages
• 2 RJ45 connections
• Connection to the PROFINET network via 8-pos. RJ45 jack
• Conformance with PROFINET specification V2.3
• IP parameters adjustable via PROFINET controller
• Automatic detection of the transmission speed in the local bus (500 kbps or 2 Mbps)
• Support for three branch terminals as a remote bus branch (32 remote bus devices in total)
• Approved for PROFIsafe applications (firmware 1.10 or later)