General Description
The AOZ1336DI is a single channel load switch with
typical 27mΩ on-resistance in a small package. It
contains an n-channel MOSFET for up to 5.5V input
voltage operation and 4A current channel with 2.5V to 5V
bias supply. The load switch is independently controlled
by a low voltage control signal through ON pin.
The AOZ1336DI integrates an internal 220Ω load
resistor for quick output discharge when load switch is
off. The optional external capacitor connected CT for
output slew rate control.
The AOZ1336DI is available in a 2mm x 2mm DFN-8L
package with bottom thermal pad and is rated over a
-40°C to +85°C ambient temperature range.

Features
 0.8V to 5.5V input voltage range
 4A continuous current
 Low RDS(ON) internal NFETs
– 27mΩ at VBIAS = 2.5V to 5V & VBIAS > VIN
 50μA low quiescent current
 Adjustable rise time
 2.5V to 5V bias voltage
 Integrated quick output discharge resistor
 Thermally enhanced 2mm x 2mm DFN-8L package

Applications
 Portable computers
 Ultrabooks
 Tablet PC
 Set top boxes
 LCD TVs
 Telecom/Networking/Datacom
equipment
 SSD
 Consumer electronics