Features
• USB Type-C and USB-PD support
- Supports USB PD3.0 Version 2.0 Spec including programmable power supply mode
- Supports one USB Type-C port
• Legacy charging
- Support for legacy charging or Type-C 5V operation when connected to USB Type-A ports
- Support for legacy charging protocols like BC1.2, Apple, AFC, QC 2.0[1]
• System-level fault protection
- VBUS to CC short protection
- On-chip overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP)
• Power
- 3.0 V to 24.5 V operation (30 V tolerant)
- Integrated VBUS load switch gate drivers with in-rush current control
• Firmware
- Firmware update available through I2C bootloader as well as over SWD interface
- CCG UFP Host Processor Interface (HPI) based Sink PPS support
• System-Level ESD Protection
- On CC, VBUS_IN_DIS, DC_OUT_DIS, D+, D–, HPI_SDA and HPI_SCL pins
- ± 8-kV contact discharge and ±15-kV air gap discharge based on IEC61000-4-2 level 4C
• Packages
- 24-pin QFN package
- Supports extended industrial temperature range (–40°C to +105°C)