• Machine adapters for disk-type turrets with:
– VDI tool holding fixtures ø30 mm, ø40 mm, ø50 mm
– Coromant Capto C5, C6 clamping unit
– Direct tool holding fixtures 20x40 mm, 25x50 mm,
¾"x1½", 1"x2"
• Tool holders for external turning tools:
20x20 mm, 25x25 mm, ¾"x¾", 1"x1"
• Tool holders for internal turning tools:
ø25 mm, ø32 mm, ø40 mm
• For cutting forces up to 8 kN
• Minimal temperature error