The plug-in terminal strip 302-SVG is equipped with a solder pin and designed for
the use on PCBs. Due to the small 8 mm pitch, this design is well suited for
applications where space is limited.
The flexible polyamide moulding can even be mounted on curved surfaces.
Used in combination with a plug-in terminal strip 302-FB plug-in terminal strip, the
contact pressure is applied by a stainless-steel spring. Plug-in direction is parallel
to each other. The wire entrance is located in plug direction.
The combination with 302-FLW-DS creates an angular plug connection which is
well suited of resolving even challenging mounting conditions. The angular plug-in
connector type 302-FLW-DS has a contact spring which forms a unit with the wire
protector.
The direction of insertion is in a 90° angle. The wire entrance is perpendicular to
the direction of insertion.
In plugged condition, all metal components are protected against accidental
contact, except for the solder pins. The screws are captive, vibration-proof and
secured against self-loosening. The strips have fixing holes to attach the screws
between the poles.
The plug-in connector can be used as three-way contact