GENERAL DESCRIPTION
The ADN2880 is a 3.3 V, high gain SiGe transimpedance amplifier (TIA). The TIA converts the small signal current of a photo detector into differential voltage output. The ADN2880 features a 315 nA typical input-referred noise, enabling an optical sensitivity of −24.2 dBm (0.85 A/W PIN). With a bandwidth of 2.5 GHz, the ADN2880 allows a data rate operation up to 3.2 Gbps. Typical power dissipation is approximately 70 mW.

FEATURES
   Bandwidth: 2.5 GHz
   Optical sensitivity: −24.2 dBm1
   Differential transimpedance: 4400 V/A
   Power dissipation: 70 mW
   Differential output swing: 260 mV p-p
   Input overload current: 4.3 mA p-p
   On-chip RSSI function
   Low frequency cutoff: 20 kHz
   On-chip PD filter: RF = 200 Ω, CF = 20 pF
   Die size: 0.7 mm × 1.2 mm

APPLICATIONS
   3.2 Gbps or below optical receivers
   SONET/GbE/FC optical receivers
   SFF-8472-compliant receivers
   PIN/APD-TIA receive optical subassemblies (ROSA)