FEATURES
• Compact, high-capacity, and
    resistant to inductive loads
    The relay is a compact 16×30.4×26.5 mm
    .630×1.197×1.043 inch. It can control an
    inductive load (cosϕ = 0.7) with inrush
    current of 70 A and steady state current of
    20 A.
• Excellent contact welding resistance
    High contact pressure, a forced opening
    mechanism, and a forced wiping
    mechanism realizes an excellent contact
    welding resistance.
• High breakdown voltage and surge
    resistant relay
    More than 6.4 mm .252 inch maintained
    for the insulation distance between contacts
    and coil, and the breakdown voltage
    between contacts and coil is 5,000 V for 1
    minute. In addition, the surge resistance
    between contacts and coil is greater than
    10,000 V.
• Resistant to external force
    An absorber mechanism is used on the
    load terminals, giving a large improvement
    in characteristics variations caused
    by the external force during FASTON
    placement/removal.
• Flux resistance mechanism
    The terminal area is plugged with resin to
    prevent flux seepage during PCB mounting. (TMP type)
• Conforms to the various safety standards
    UL, CSA approved.
    TÜV, VDE under application.
• The line up can support economical
    mounting methods.
    The relay are equipped with a drive terminal
    (coil terminal) on one side for PCBs,
    and a load terminal (tab terminal #250) on
    the reverse side. The line up includes the
    TM type which can be attached directly to
    the PCB composing a drive circuit, and
    the TMP type which supports economical
    wiring. The TMP type can also be directly
    attached, and a high capacity load can be
    wired to the tab terminal.