General Description
The MIC4605 is an 85V half-bridge MOSFET driver
that features adaptive dead time and shoot-through
protection. The adaptive dead-time circuitry actively
monitors the half-bridge outputs to minimize the time
between high-side and low-side MOSFET transitions,
thus maximizing power efficiency. Shoot-through
protection circuitry prevents erroneous inputs and noise
from turning both MOSFETS on at the same time.
The MIC4605 also offers a wide 5.5V to 16V operating
supply range to maximize system efficiency. The low
5.5V operating voltage allows longer run times in
battery-powered applications. Additionally, the MIC4605
device’s adjustable gate drive sets the gate drive voltage
to VDD for optimal MOSFET RDS(ON), which minimizes
power loss due to the MOSFET’s RDS(ON).
The MIC4605 is available in an 8-pin SOIC package
and a tiny 10-pin 2.5 mm x 2.5 mm TDFN package.
Both packages have an operating junction temperature
range of -40°C to +125°C.

Features
• 5.5V to 16V Gate Drive Supply Voltage Range
• Advanced Adaptive Dead Time
• Intelligent Shoot-Through Protection:
- MIC4605-1: Dual TTL inputs
- MIC4605-2: Single PWM input
• Enable Input for On/Off Control
• On-Chip Bootstrap Diode
• Fast 35 ns Propagation Times
• Drives 1000 pF Load with 20 ns Rise and
Fall Times
• Low-Power Consumption: 135 μA Quiescent
Current
• Separate High-Side and Low-Side Undervoltage
Protection
• -40°C to +125°C Junction Temperature Range
• AEC-Q100 Qualified for the SOIC Package

Applications
• Fans
• Power Inverters
• High-Voltage Step-Down Regulators
• Half, Full and 3-Phase Bridge Motor Drives
• Appliances
• E-Bikes
• Automotive Applications