The NCS2005 provides high performance in a wide range of
applications. The NCS2005 offers beyond rail−to−rail input range, full
rail−to−rail output swing, large capacitive load driving ability, and low
distortion. The inputs can be driven by voltages that exceed both
power supply rails, thus eliminating concerns over exceeding the
common−mode voltage range. The rail−to−rail output swing
capability provides the maximum possible dynamic range at the
output. This is particularly important when operating on low supply
voltages.
Operating on supplies of 2.2 V to 32 V, the NCS2005 is excellent for
a very wide range of applications in low power systems. With a supply
current of 1.3 mA, the 8 MHz gain−bandwidth of this device supports
applications where faster speeds are required. Placing the amplifier
right at the signal source reduces board size and simplifies signal
routing. The NCS2005 is available in a space−saving 5−pin SOT−23
package.

Features
• Wide Power Supply Range: 2.2 V to 32 V
• Common Mode Voltage Range Wider than Rail−to−Rail:
VCM = −0.1 V to 5.1 V @ VS = 5 V
• Wide Gain−bandwidth: 8 MHz typical
• Low Supply Current: 1.3 mA typical
• Stable with a 1 nF Capacitor Load with a Phase Margin over 25° @
VS = 10 V
• Available in a Space−saving 5−pin SOT23 Package
• These devices are Pb−free, Halogen free/BFR Free and are RoHS
Compliant

Typical Applications
• Active Filters
• Voltage Referenced Buffers
• Sensors and Instrumentation
• Microphone Amplifiers
• ASIC Input Drivers
• Portable Communications
• PCMCIA Cards