FEATURES
GENERAL
• Supports Serial Peripheral Interface -- Mode 0 and
Mode 3
• Single Power Supply Operation
- 1.65 to 2.0 volt for read, erase, and program operations
• 268,435,456 x 1 bit structure or
134,217,728 x 2 bits (two I/O mode) structure or
67,108,864 x 4 bits (four I/O mode) structure
• Protocol Support
- Single I/O, Dual I/O and Quad I/O
• Latch-up protected to 100mA from -1V to Vcc +1V
• Low Vcc write inhibit is from 1.0V to 1.4V
• Fast read for SPI mode
- Support clock frequency up to 133MHz
- Support Fast Read, 2READ, DREAD, 4READ,
QREAD instructions
- Support DTR (Double Transfer Rate) Mode
- Configurable dummy cycle number for fast read
operation
• Support Performance Enhance Mode - XIP
(execute-in-place)
• Quad Peripheral Interface (QPI) available
• Equal Sectors with 4K byte each, or Equal Blocks
with 32K byte each or Equal Blocks with 64K byte
each
- Any Block can be erased individually
• Programming:
- 256byte page buffer
- Quad Input/Output page program(4PP) to enhance
program performance
• Typical 100,000 erase/program cycles
• 20 years data retention