1 Features
• Ultra-low 0.95-nV/√Hz voltage noise
• High speed:
– 2-GHz gain-bandwidth product
– 700-V/μs slew rate
– 30-ns settling time (0.1%)
• Stable at gains ≥10 V/V
• Output drive, IO = 200 mA (typical)
• Very low distortion:
– THD = –78 dBc (f = 1 MHz, RL = 150 Ω)
– THD+N = –114 dBc (f = 1 kHz, BW = 80 kHz)
• Wide range of power supplies:
– VCC = ±4.5 V to ±18 V
• Offset nulling pins on the OPA892

2 Applications
• Ultrasound scanner
• Source measurement unit (SMU)
• Power quality meter
• Ultrasound Scanners
• Vector signal transceiver (VST)
• Professional audio mixer or control surface
• Professional microphones and wireless systems
• Professional speaker systems
• Professional audio amplifier
• Soundbar
• Turntable
• Professional video camera
• Guitar and other instrument amplifier
• Data acquisition (DAQ)

3 Description
The OPA892 and OPA2892 (OPAx892) are ultra-low
voltage noise, high-speed voltage-feedback amplifiers
that are an excellent choice for applications requiring
low voltage noise, including communication and
imaging. The single-amplifier OPA892 and the dualamplifier
OPA2892 offer very good ac performance
with a 290‑MHz bandwidth, a 700‑V/μs slew rate, and
a 30‑ns settling time (0.1%) for a gain of 10 V/V. The
OPAx892 are stable at gains of 10 or greater and –9
or less. These amplifiers have a high drive capability
of 200 mA and draw only 7.5 mA of supply current
per amplifier. With a total harmonic distortion (THD)
of –68 dBc at f = 1 MHz, the OPAx892 are designed
for applications requiring low distortion. Because the
distortion remains low over a wide range of output
voltages, the OPAx892 is useful in large dynamicrange
applications such as imaging, sonar, and audio.