The 1-channel analog signal isolator IMCAI-11EX-I/L features an intrinsically safe input
circuit. The device can be mounted in zone 2.
The device must be protected against mechanical load on connector and housing
when mounted in zone 2 or 22. For this,
use the TURCK cover plate IMC-SG (Ident
no.7560016).
The standard current signal is transmitted
from the Ex-area to the safe area without attenuation (1:1). The output circuit is equipped
with a short-circuit protected power source.

Intrinsically save analog data transmitters can
be connected to the device in the Ex area.
The device is loop-powered.

■ Analog signal isolator, 1-channel
■ Input circuit: 0/4…20 mA
■ Output circuit: 0/4…20 mA
■ Complete galvanic isolation
■ Input reverse-polarity protected
■ Protection class IP67
■ Connection with M12 male connectors
■ ATEX, CFMUS, IECEx, TR CU
■ Installation in zone 2/22