DESCRIPTION

The MP3011 is a fully automatic driver for powering two white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive inductor. The driver allows PWM operation to

support brightness control. 

FEATURES

• 2% LED Current Matching

• High Efficiency (>93%)

• Current Source Outputs

• No Ballast Resistors Required

• 1x, 1.5x and 2x Automatic Modes

• Constant Frequency Operation

• Automatic LED Detection

• High and Low Frequency PWM Capability

• 2.5V to 5.5V Operation

• Less than 1µA Leakage during Shutdown

• Detects Changes in Battery Level

• No External Schottky Diode Required

• Soft-Start and Soft Switching Operation



APPLICATIONS

• Cell Phones

• PDA or Hand Held Computers

• White LED Application at 3.6V Supply