USE OF CABLE
as fieldbus cables for CAN (Controller Area Network) systems, in the field
of factory automation, for fixed installation & flexible applications.
This bussystem has its origins in the automotive sector and has
established itself in the field of production automation.
Standard acc. to CAN Spec.: ISO 11898
SPECIAL FEATURES
largely resistant to grease, coolant fluids and lubricants
oil-resistant: acc. to DIN EN 60811-2-1 (only mineral oil))
UV-resistant (TRAY & BURIAL)
direct burial (BURIAL)
EMC compliant shielding max. transmission rate: 1 Mbit/s at 40m segment length max. cable lengths for a bus segment depending on the cross section
0- 40 m AWG24, AWG22 | 40-300 m AWG22, AWG20 |
300-600 m AWG20 | 600-1.000 m AWG19
REMARKS
conform to RoHS
conform to DESINA (violet)
conform to 2014/35/EU-Guideline ("Low-Voltage Directive") CE
LABS-/silicone-free (during production)