FEATURES Programmable FastDSP audio processing engine
Up to 768 kHz sample rate Biquad filters, limiters, volume controls, mixing
28-bit SigmaDSP audio processing core Visually programmable using SigmaStudio
Up to 50 MIPS performance Low latency, 24-bit ADCs and DACs 96 dB SNR (signal through PGA and ADC with A-weighted
filter) 105 dB combined SNR (signal through DAC and headphone
with A-weighted filter) Serial port fSYNC frequency from 8 kHz to 768 kHz 5 μs group delay (fS = 768 kHz) analog in to analog out with
FastDSP bypass (zero instructions)
4 single-ended analog inputs, configurable as microphone
or line inputs
8 digital microphone inputs
2 analog differential audio outputs, configurable as either
line output or headphone driver PLL supporting any input clock rate from 30 kHz to 27 MHz Full-duplex, 4-channel ASRCs 2, 16-channel serial audio ports supporting I2S, left justified,
or up to TDM16
8 interpolators and 8 decimators with flexible routing
Power supplies
Analog AVDD at 1.8 V typical
Digital I/O IOVDD at 1.1 V to 1.98 V
Digital DVDD at 0.9 V typical
Low power (11.079 mW for typical stereo ANC settings) I2C and SPI control interfaces, self boot from I2C EEPROM Flexible GPIO 42-ball, 0.35 mm pitch, 2.695 mm × 2.320 mm WLCSP APPLICATIONS
Noise cancelling handsets, headsets, and headphones
Bluetooth ANC handsets, headsets, and headphones Personal navigation devices
Digital still and video cameras Musical instrument effect processors
Multimedia speaker systems Smartphones