GENERAL DESCRIPTION
The ICS8344I-01 is a low voltage, low skew fanout buffer and a member of the HiPerClockS™ family of High Performance Clock Solutions from IDT. The ICS8344I-01 has two selectable clock inputs. The CLKx, nCLKx pairs can accept most standard differential input levels. The ICS8344I-01 is designed to translate any differential signal level to LVCMOS/LVTTL levels. The low impedance LVCMOS/LVTTL outputs are designed to drive 50Ω series or parallel terminated transmission lines.

FEATURES
• Twenty-four LVCMOS/LVTTL outputs,
   7Ω typical output impedance
• Two selectable differential CLKx, nCLKx inputs
• CLK0, nCLK0 and CLK1, nCLK1 pairs can accept the
   following input levels: LVDS, LVPECL, LVHSTL, SSTL, HCSL
• Maximum output frequency: 200MHz
• Translates any single ended input signal to LVCMOS/LVTTL
   with resistor bias on nCLK input
• Synchronous clock enable
• Output skew: 250ps (maximum)
• Part-to-part skew: 1ns (maximum)
• Bank skew: 125ps (maximum)
• Propagation delay: 5.25ns (maximum)
• Output supply modes:
   Core/Output
   3.3V/3.3V
   2.5V/2.5V
   3.3V/2.5V
• -40°C to 85°C ambient operating temperature
• Available in both standard (RoHS 5) and lead-free (RoHS 6)
   packages